The HC-HD300 is equipped with a 1/3 inch bayonet lens mount and employs three 1/3-inch CMOS progressive-scan sensors, each with 2.2 million pixels, in RGB prism formation
Ikegami has chosen IBC2014 as the venue for the introduction of the HC-HD300, a compact and aggressively-priced high-definition camera designed for a wide range of applications. These include satellite and cable television presentation studios, independent programme-making, training studios and religious television channels.
The HC-HD300 is equipped with a 1/3 inch bayonet lens mount and employs three 1/3-inch CMOS progressive-scan sensors, each with 2.2 million pixels, in RGB prism formation. It delivers high quality pictures in all commonly used HD video formats: 1920 x 1080/59.94i, 1920 x 1080/50i, 1280 x 720/59.94p, 1280 x 720/50p and 720 x 480/59.94i (NTSC), 720 x 576/50i (PAL).
Typical performance characteristics of the HC-HD300 in 1080/59.94i output mode are 1,000 television lines horizontal resolution, 58 dB signal-to-noise ratio and 2,000 lux sensitivity (89.9 per cent white reflection) at F10 aperture. Equivalent aperture in 1080/50i mode for this light level is F11.
Camera gain be attenuated from mid level to -3 or -6 dB, or increased by +3, +6, +9, +12 or + 18 dB. Integral neutral density filters (100 per cent, 25 per cent, 6.2 per cent and 1.6 per cent) can be switched in as required, plus operator-selectable 3,200, 4,300, 6,300 and 8,000 kelvin electronic colour conversion. An electric shutter can be set to 1/100, 1/120, 1/250, 1/500, 1/1,000 or 1/2,000 second speed.
The HC-HD300 weighs 4.5 kg including FA-300 fibre adapter and measures 139 x 270 x 337 mm (width x depth x height). Operating voltage range is 11 to 16 volts and power consumption (excluding FA-300) is 19 watts. The camera is designed for use within an ambient temperature range of -20 to +45 Celsius and 30 per cent to 90 per cent non-condensing operating humidity.
Available options include the newly-developed FA-300 fibre adaptor and BSF-300 base station. The HC-HD300’s output cable is fitted with a Neutrik opticalCon Duo connector to provide efficient protection against dust. Up to 250 metres of cable can be connected direct to the camera, extendable to 10 kilometres by using external power.
Supporting features of the HC-HD300 include the focus assist and lens aberration correction functions employed in Ikegami’s established UnicamHD range of cameras.
The Ikegami HC-HD300 will be deliverable from December 2014.
Details of the full Ikegami range of broadcast cameras can be seen athttp://de.ikegami.co.jp/products/broadcast/camerasystem/
Ikegami’s Broadcast and Professional Video Division will exhibit on stand 11.A31 at IBC2014, RAI Amsterdam, September 12-16. Company representatives will include Masanori Kondo (President, Ikegami Europe), Peter Grimm (General Manager, Broadcast Business Development) and Michael Lätzsch (Broadcast and Professional Video Division Manager).
Ikegami Tsushinki Company Limited (http://www.ikegami.com) is a leading manufacturer of specialised cameras, image processing and transmission equipment. Founded in 1946 in Tokyo, Japan, the company today has around 800 employees working across three factories and nine sales and service organisations all over the world. Ikegami is a world leader in the development and delivery of image capture, transmission, recording, processing and display products for broadcast, inspection, medical and security applications.
Ikegami Electronics (Europe) GmbH (http://www.ikegami.de) was founded in 1970. Based in Neuss, Germany, it is the sales and service headquarters for Europe and Africa. There is a branch in the UK. In the other European countries and Africa, Ikegami works in partnership with authorised distributors and dealers.